http://blog.whatgeek.com.pt/arduino/l298-dual-h-bridge-motor-driver/ http://adhocnode.com/category/arduino/
For the AF Assist, this may come in handy. http://brunningsoftware.co.uk/FET.htm
I notices that when milling a board who’s NC code was generated by Copper CAM, there is an offset between the drilled holes and the
Looking into how I’m going to get audio into the different rooms of this house where there is no structured wiring in behind the walls
Made some progress today. Measured the wavelength of a couple of Canon AF assist lights. AF assist light from a Canon 540EZ flash. The wavelength
Work on the new AF Assistant has gotten to a point where I thought I would post some progress. First off, the name is slightly
LED Drivers Single or multi cell LED driver solution 800mA current SINGLE OR MULTI CELL LED DRIVER SOLUTION 800mA current 350mA LED STEP-DOWN CONVERTER 500mA
So adding a capacitor and resistor in series, adds a delay. T=RxC So for a 0 .1 sec delay, I need a 100μF capacitor and
Process to get PCB boards made. – Design in Eagle, and export from the CAM module in Eagle layers 16, 17, 18, 20, as GERBER_RS274X