Came across this today, and think it would come in handy in the future http://123free-3dmodels.blogspot.ca/
A project I’m working on required some clear pieces, so I purchased some HDglass from FormFutura as I heard good things about the plastic’s transparency.
Just finished printing a near pencil holder (source) and I’m very pleased how it turned out. Printed in white ABS+ made by ESun at 0.2mm
Looking to make some 90deg gear trains, and wanted to know how much force 3d printed heard could resist. After printing some gears, a holding
Some interesting and some common ways to make 3d parts stronger. http://st3p3d.com/blogs/3d-printing/14992261-a-few-ways-to-strengthen-3d-printed-parts
To print large objects, they need to be split up into smaller pieces that fit within the 3d printer’s build volume. Some useful links: Stratasys
Came across some interesting pattents that are still held by Stratasys regarding 3d printing and heated chambers. Heated chamber to be between 70 and 90
In an effort to try and control the internal fill material of a part (both direction and amount) I’ve been experimenting with some ideas. (I am
In designing some components I was interested to figure out what the limitations were of the printer, and figure out how it behaves when the