Needing to convert some avi files to a format that After Effects could read. Settled on converting the avi file to a x264 format in
Just finished printing a near pencil holder (source) and I’m very pleased how it turned out. Printed in white ABS+ made by ESun at 0.2mm
For my AF Assist tool, I decided to make my own optical lenses to focus the light from the IR LED. I experimented with a
I updated to the latest version of UnRaid (v6.2.1) and Crashplan that runs ina docker container started misbehaving. At first it kept cycling through “Syncronizing
Excellent three part series of articles talking about the right tools required along with many side articles providing more details. http://blog.cnccookbook.com/2016/04/19/can-figure-tool-use-cnc-mill-router-part-1-holes/ http://blog.cnccookbook.com/2016/04/26/can-figure-tool-use-cnc-mill-router-part-2-2d-profiling/ http://blog.cnccookbook.com/2016/05/10/can-figure-tool-use-cnc-mill-router-part-3-pocketing/
I’ve always used webbing for setting up top rope anchors, but recently I’ve investigated using cord instead of webbing. For one thing, knots are easier
The webserver I was working on was running out of space only to find people had been uploading anywhere from 3Mb to 9MB jpeg images.
I had this problem before where CrashPlan (the backup service) software will seem to be stuck “analyzing” data over and over without actually backing it
So the troubles seemed to be over with the ESXi server crashing when I was starting VMs that used PCI devices which had been passed
I figured I should put together a list of what the development tests I want to do before setting out to actually build a prototype